Conservation room

Measures the voltage across the group and stops it in the event of too large fluctuations. Mounted on the group.

Fault indicator linked to the group. The alarm visibly and audibly alerts to any changes to the predefined parameters.

Recorder on diagram diameter 125 mm.

The USB recorder is used to record the temperatures ranging from 10 seconds to 12 hours. The two softwares are very easy to use and allow you to configure your recorder: name, sampling frequency, alarm thresholds and retrieve the recorded temperature curves, on which you are shown the alarm thresholds.

Autonomous recorder, manages the acquisition of measurements, their recording on internal memory, alerts in case of overflow threshold and allows direct processing of data on touch screen with plot of the graph or on PC.

Back-up is a box allowing redundant operation asymmetric of the 2 refrigeration groups by alternating 12 hours (Configuration possible or not JFV time slots). In case of group malfunction, automatic switching to the 2nd group. Switching on of the 2 groups if needed.

Device connected to the refrigeration unit allowing the remote management and control via PC. It can also transmit group activities by fax or sms (alarm). Connection possible to other building equipment.

By using chilled water, this refrigeration unit reduces energy consumption, operating costs and C02 emissions. It also has the advantage of generating less heat release around its environment.

Coupled with modules photovoltaic, the HYGECOLD box, guarantees the supply of quality power supply and prioritises the solar source.

All cooling units are available in different Voltage/Hz/Phase.

For switching on the lighting when the door is open.

Allows the manipulation of a body without having to open the entire cold chamber. Also recommended in case of judicial seals, each door can be locked

Thanks to a height of up to 2 200 mm, this opening makes it possible to optimise the number of bodies per tier (up to 5 bodies) and to adapt to all types of spaces. The width is also adjustable for the introduction of bariatric bodies.

HYGECO also offers fully modular post-mortem solutions which have the advantage of adapting to the different configurations of the premises without any surface limit.

– Positive temperature: Proposed with or without floor – thickness of 60 mm walls.
– Negative temperature: Equipped with a floor identical to the panels of walls with a thickness of 100 mm and a multiplex coating with non-slip phenolic resin.
– Access: Hinged or sliding doors are available in different dimensions from 900 mm to 1,500 mm.

Multiple uses: Refrigerated rooms in the event of mass deaths with suitable equipment. Storage of flowers on shelves. Cold chambers for the animal sector.

Proposed for rooms with little or no clearance. The doors open at 120° thanks to cylinders with gas shock absorbers.

Equipped with a refrigeration unit per compartment, this configuration allows the simultaneous use of the cold room in dual temperature Positive/Negative.

Mobile solutions of 20 or 40 feet, specially fitted and equipped for a capacity ranging up to 50 bodies for a temperature down to -20 ° C. Equipped with an integrated refrigeration unit and a generator the mobile unit operates autonomously on the ground or charged on a trailer. It can be deployed quickly in an emergency on a “disaster” site and also serve as a temporary solution during renovation of a mortuary or even permanently installed in remote places. Many configurations can be envisaged and developed to measure according to needs.

Positioned between two rooms (presentation / preparation) this type of opening ensures the transfer from one room to another without manipulation or movement of the bodies. Ensures discretion and comfort for the operator.

Specially studied for the manipulation of bariatric bodies this trolley will facilitate the transfer of bodies and / or coffins in funeral environment. Equipped with a hydraulic cylinder system, a 12 volt battery and a usage meter, it provides up / down precision controlled at the handles. 4 swivel wheels diameter 100 mm of which 2 with brakes – Precision bearing – Can be used between -20 ° C and + 60 ° C.

Compatible options : Réf. FPM0835 / Réf. 31115 / Réf. 31116

Specially studied for the manipulation of bariatric bodies this trolley will facilitate the transfer of bodies and / or coffins in funeral environment. Equipped with a hydraulic cylinder system, a 12 volt battery and a usage meter, it provides up / down precision controlled at the handles. 4 swivel wheels diameter 100 mm of which 2 with brakes – Precision bearing – Can be used between -20 ° C and + 60 ° C.

Compatible options : Réf. 31100 / Réf. FPM0835 / Réf. 31115 / Réf. 31116

Trolleys fitted with a 24 VDC silent electric actuator, 1×2.9 Ah (about 40 lifting) ensuring a precise ascent / descent and a battery. Handle control provides additional safety in use. It is equipped with a choice of guide rails for stretchers on casters or 5 PVC rollers for slide stretchers. 4 swivel wheels diameter 100 mm, 2 with brakes – Bearing precision – Usable between -20 ° C and + 60 ° C.

Compatible options : Réf. FPM0835 – Réf. 31115

Trolleys fitted with a 24 VDC silent electric actuator, 1×2.9 Ah (about 40 lifting) ensuring a precise ascent / descent and a battery. Handle control provides additional safety in use. It is equipped with a choice of guide rails for stretchers on casters or 5 PVC rollers for slide stretchers. 4 swivel wheels diameter 100 mm, 2 with brakes – Bearing precision – Usable between -20 ° C and + 60 ° C.

Compatible options : Réf. 31100 – Réf. FPM0835 – Réf. 31115

Hydraulic bolts with pressure reduction allowing the control by foot of the smooth ascent / descent. They can be equipped with stainless steel rails or 5 PVC rollers. Resistant to corrosion, scratches and chemicals, they are light and easy to clean.

4 pivoting wheels diameter 100 mm, 2 with brakes
Compatible options : Réf. 31115

Hydraulic bolts with pressure reduction allowing the control by foot of the smooth ascent / descent. They can be equipped with stainless steel rails or 5 PVC rollers. Resistant to corrosion, scratches and chemicals, they are light and easy to clean.

4 pivoting wheels diameter 100 mm, 2 with brakes
Compatible options : Réf. 31100 – 31115

Body trays designed for interior fittings with rollers. They are perfectly suitable for the storage of bodies. The coffin model is designed to keep coffins in a stable position.

Compatible trolleys : Réf. 31122 – 31124 – 31126 – 31127 – 31140 – 31140 Inox – 31141 – 31141 Inox

Body trays designed for interior fittings with rollers. They are perfectly suitable for the storage of bodies. The coffin model is designed to keep coffins in a stable position.

Compatible trolleys : Réf. 31122 – 31124 – 31126 – 31127 – 31140 – 31140 Inox – 31141 – 31141 Inox

Body trays designed for interior fittings with rollers. They are perfectly suitable for the storage of bodies. The coffin model is designed to keep coffins in a stable position.

Compatible trolleys : Réf. 31122 – 31124 – 31126 – 31127 – 31140 – 31140 Inox – 31141 – 31141 Inox

Body tray developed for interior rail fittings. They are perfectly suited for the preparation of bodies. The coffin model is designed to keep coffins in a stable position. They are fitted with smooth hub castors with threadguards protecting the hub of any foreign body.

Casters : Polypropylène diameter 100 mm
Compatible trolleys : Réf. 31022 – 31024 – 31026 – 31027 – 31040 – 31040 Inox – 31041 – 31041 Inox

Body tray developed for interior rail fittings. They are perfectly suited for the preparation of bodies. The coffin model is designed to keep coffins in a stable position. They are fitted with smooth hub castors with threadguards protecting the hub of any foreign body.

Casters : Polypropylène diameter 100 mm
Compatible trolleys : Réf. 31022 – 31024 – 31026 – 31027 – 31040 – 31040 Inox – 31041 – 31041 Inox

Body tray developed for interior rail fittings. They are perfectly suited for the preparation of bodies. The coffin model is designed to keep coffins in a stable position. They are fitted with smooth hub castors with threadguards protecting the hub of any foreign body.

Casters : Polypropylène diameter 100 mm
Compatible trolleys : Réf. 31022 – 31024 – 31026 – 31027 – 31040 – 31040 Inox – 31041 – 31041 Inox

Bactericidal disinfectant in accordance with NF EN 1040 and the NF EN 1276 standard (contact time 5 minutes at 20 ° C – cleanliness condition) The disinfectant action is provided by ammoniums quaternaries enhanced by alcohols. One-shot system: empties completely into one spray switched on manually.”

Recommended for all stainless steel surfaces

The compact air treatment system is particularly suitable for mortuary cells and laboratory rooms. Extremely efficient thanks to its easy installation and advanced technology. The device purifies, disinfects and deodorizes without intervention. It is fixed to the wall or the ceiling, it is energy efficient and requires very little maintenance

Determines the load weight of the lift trolley. Equipped with a touch screen with user-programmed data display. weighing, counting, checking +/-. Robust housing, waterproof and easy cleaning.

Provides flawless assitance during trolley handling. Operated by a switch positioned on the handle, the guide system allows easy movement of the trolley.

Same design as ref. 31102, but fitted with a guide rail either on the right or on the left. The coffin stops with bevelled teflon brake blocks.

Support designed to equip the HR250 trolley and HR350 crematorium type (ref. 31040 – 31041). Lateral or longitudinal access allows the transfer of coffins to all types of cremation furnace introduction tables. The tray has 20 omnidirectional balls (options for large tray with 27 balls) for optimal handling of the coffin. It is also equipped with bevelled Teflon pads and a coffin blocking by raising to manual mechanism.

Useful accessory, allowing adjustment of trolley height by pressing on the pedal.

Equipment specially designed to be adaptable to our range of rail lift trucks. Easy longitudinal transfer of coffins at bottom flat on roller conveyor. Set of 5 PVC rollers fixed between 2 tubes 304 L stainless steel squares positioned between the rails when mixed with coffin locking system by manual mechanism raising.