Preparation room

This top-of-the-range preparation table makes it possible to meet 3 objectives: to reduce employee exposure to chemical risks, to reduce employee exposure to biological risks during the preparation of bodies, and to reduce musculoskeletal disorders during the handling of bodies. This suction preparation table meets hygiene and safety standards during the preparation of corpses while greatly improving the working conditions of professionals. The design of the table allows the capture of the products at the source and the channelling of the flow of pollutants emitted towards a ventilation and elimination installation, thus avoiding its diffusion in the atmosphere of the work room. The table is also equipped with a device allowing the height of the table top to be adapted to the user’s morphology during operations. It also allows the insertion of trays directly into its structure, transforming it into a working surface, thus considerably reducing the number of body manipulations.

The service column allows for the discharge of effluent through a “plug and play” connection between the table and a specially designed front exit. There is no need to screw or use a crimping collar. The top and edges of the column are reinforced for impact resistance. The column is equipped with a stainless steel suction port and a PVC waste water pipe located along the width of the column for easy connection to the table. The column is equipped with a stainless steel suction port and a PVC waste water pipe located across the width of the column for easy connection to the table. The reduction of the exhaust duct from 280 to 250 mm reduces the radiated noise.

Ergonomic preparation table adapted to any use in the post-mortem laboratory. It consists of a curved stainless steel tray with drain and PVC pipe. It is removable and easy to transport when needed. Its sufficient dimensions guarantee for a comfortable use.

Available options: Stainless steel bucket and cap designed to connect the waste pipe.

Identical properties ref. 33301-F equipped with 4 wheels, 2 with brakes. Same as the preceding model, optional accessories can be added.

A mobile autopsy table with drain evacuation system. Completely made of stainless steel 304L. There is a soundproofing Kevlar coating under the work plate to reduce noise during operations.Hydraulic pedestal mounted on stainless steel frame with 4 wheels including two with brakes.

Tiltable table plate 2×25°.

Mobile and height adjustable preparation table with a sink. Entirely made of stainless steel with a soundproofing Kevlar coating under the worktop reducing noise during operations. It is appreciated by the end users for its maneuvers in the reduced spaces.

The structure and the manufacturing of this model place it among the best conceived preparation tables on the funeral market. Specially designed to clean and prepare the deceased. Work surface made of stainless steel 304 L. 6 legs give extra stability and four can be fixed to the ground. 4 can be fixed to the ground. Sink at the end of workspace equipped with plughole. Equipped with a washing tank at the end of the worktop with drain evacuation. Supplied with a hand shower with flexible length 3 m and a hot / cold water mixer, elbow control.

Options available: permanent rinsing of the tray – 316 stainless steel finish – version mobile equipped with 4 castors with brake.

A modern design table, made of 304 L stainless steel, perfectly meets the requirements of the funeral sector. Great stability ensured by the central foot. Easy movement of operators. Ergonomic work positions. Equipped with a permanent tray rinsing system to improve hygiene.

Taps: hand shower with hose length 3 m. water-hot / cold water mixer.
Option available: Stainless steel 316.

Element specially designed to receive body trays from the mortuary cold chambers. Once the body is placed on the body tray (which will also be the storage trays in the conservation rooms), it will simply be transferred to the support without using the body lifter. Hygiene, stability, ergonomics, multifunctionality and quality of manufacture are its main assets. Single or double use, with or without a tray The equipment is a must have for funeral homes (toilet and embalming care rooms).

Available options: Sink / Shower hose / Tap mixer /Ventilation system to connect / Sockets (electrical, HDMI, RJ 45…) / Light switch.

Body tray entirely made of stainless steel 304 L. Curved diamond cut with drainage point and cap. The tray is fitted with 4 casters and has 4 integrated handles.

Available option: Stainless steel 316

A high-end model made with quality materials, this body preparation table complements the equipment previously offered. Stamped tray with tap and shower hot/cold water with elbow control and waterproof electrical outlet 230 V. (Compliance with current Health and Safety Standards).

Available option: Top in stainless steel 316.