Preparation room

This top-of-the-range preparation table makes it possible to meet 3 objectives: to reduce employee exposure to chemical risks, to reduce employee exposure to biological risks during the preparation of bodies, and to reduce musculoskeletal disorders during the handling of bodies. This suction preparation table meets hygiene and safety standards during the preparation of corpses while greatly improving the working conditions of professionals. The design of the table allows the capture of the products at the source and the channelling of the flow of pollutants emitted towards a ventilation and elimination installation, thus avoiding its diffusion in the atmosphere of the work room. The table is also equipped with a device allowing the height of the table top to be adapted to the user’s morphology during operations. It also allows the insertion of trays directly into its structure, transforming it into a working surface, thus considerably reducing the number of body manipulations.

The service column allows for the discharge of effluent through a “plug and play” connection between the table and a specially designed front exit. There is no need to screw or use a crimping collar. The top and edges of the column are reinforced for impact resistance. The column is equipped with a stainless steel suction port and a PVC waste water pipe located along the width of the column for easy connection to the table. The column is equipped with a stainless steel suction port and a PVC waste water pipe located across the width of the column for easy connection to the table. The reduction of the exhaust duct from 280 to 250 mm reduces the radiated noise.

Ergonomic preparation table adapted to any use in the post-mortem laboratory. It consists of a curved stainless steel tray with drain and PVC pipe. It is removable and easy to transport when needed. Its sufficient dimensions guarantee for a comfortable use.

Available options: Stainless steel bucket and cap designed to connect the waste pipe.

Air Purifier or Filtration unit is a necessery device in post-mortem prep rooms both in the Funeral home and the Mortuary lab. It must ensure a renewal of air of at least 4 volumes / hour during the preparation time; It must be equipped with a low outlet. The air released outside the building is previously treated with an absorbent filter and deodorant. HYGECO has built a range of several models to meet the standards in force.

In order to protect embalmers and funeral professionals, HYGECO offers an integrated air purifier with filters and technologies specifically designed for this field. During the course of their work, employees are exposed to many risks. Formaldehyde is a powerful allergen that can cause respiratory sensitivity. It should be considered a potential carcinogen that justifies using effective ventilation during embalming treatments

Placed above the body to keep the instruments near the operator.
Compatible with our range of tables and supports.

Ergonomic accessory to optimize the work of end users, it provides a double function of dissection and instrument tray. Easily mobile throughout the preparation table. Compatible with our range of tables and supports.

Generally used for head support, it is also suitable for elevating arms or legs.

Specially designed to be placed under the neck.

To maintain stability of the head during the preparation. Compatible with our range of tables and supports.

To help lift the body so as not to hinder the flow of liquid to the drain.
Compatible with our range of tables and supports.

Silent and efficient machine for disposal of waste and residue in the autopsy room. Fits autopsy tables. Activated by pneumatic switch. Voltage: 220/240 V. HP: 1/2 HP.

Option to be decided at the time of ordering due to structural adaptations involved.

High-performance unit combining sturdy design with ease of use. Chrome brass construction. Can be fully dismantled. Direct connection to tap threads 15 x 21. Lever provides reverse flow for vacuum or cleaning aspiration tube. Built-in viewing window.

Stainless steel bucket with 4 pivoting wheels support.

Small stainless steel table, particularly useful for autopsies. All necessary instruments can be put on the workspace and kept within easy reach of the operator.

Floor mounted cabinet with backsplash. Sanitary space behind. Ergonomics: cut edges. Security: finishing crushed folds and suspended sliding doors.

304L stainless steel top with anti-runoff edges and backsplash. Side with straight edges, dropped 40 mm. Rear sanitary space for the passage of plumbing reservations. Medical lever taps and hand shower with hose 3 metres.

Wall cabinet: suspended sliding doors with integrated handle and without lower rails to avoid any deposit. Ergonomics: cut edges reinforcing the rigidity of the side walls.

High cabinet with door. Available widths 600 mm and 1 000 mm. Swing door doubled for a better stability and rigidity of the whole unit. Shelves adjustable in height. Casters available only for the 1 000 mm model.

Important furniture to complete functional post mortem labratory equipment. The simple washing unit is equipped with a rear splashguard and stainless steel stamped sink allowing the washing of the body. Its anti-runoff edges and overflow tube ensure maximum operator safety. Very easy to use with its mixing HW/CW elbow control tap and a flexible hand shower of 3 metres.

This model is equipped with 3 drawers. 2 of them have a stainless steel mobile container. The first containers are designed for instrument storage. The second one on casters is a mobile cupboard. Workspace equipped with anti drip edges and splashback.

Identical to the preceding model but without cupboard.

Washing unit specially designed for small areas.

Entirely made of 304L stainless steel with backsplash and a non-return valve. Femoral control.

Identical properties ref. 33301-F equipped with 4 wheels, 2 with brakes. Same as the preceding model, optional accessories can be added.

A mobile autopsy table with drain evacuation system. Completely made of stainless steel 304L. There is a soundproofing Kevlar coating under the work plate to reduce noise during operations.Hydraulic pedestal mounted on stainless steel frame with 4 wheels including two with brakes.

Tiltable table plate 2×25°.

Mobile and height adjustable preparation table with a sink. Entirely made of stainless steel with a soundproofing Kevlar coating under the worktop reducing noise during operations. It is appreciated by the end users for its maneuvers in the reduced spaces.

Wall mounted. Automatic hose reel. Supply water M 1/2″. Max. operating temperature: 70°C.Tap with anti-pollution breaker, spray nozzle with trigger.

For maintenance, cleaning and disinfection of laboratories and cold chambers. System allows proportioned dispensing of disinfectants without electricity. Spray reinforced rubber (20m) + spray gun + hose rest. To be used with Surfanios desinfectant ref. 03630B.

The structure and the manufacturing of this model place it among the best conceived preparation tables on the funeral market. Specially designed to clean and prepare the deceased. Work surface made of stainless steel 304 L. 6 legs give extra stability and four can be fixed to the ground. 4 can be fixed to the ground. Sink at the end of workspace equipped with plughole. Equipped with a washing tank at the end of the worktop with drain evacuation. Supplied with a hand shower with flexible length 3 m and a hot / cold water mixer, elbow control.

Options available: permanent rinsing of the tray – 316 stainless steel finish – version mobile equipped with 4 castors with brake.

A modern design table, made of 304 L stainless steel, perfectly meets the requirements of the funeral sector. Great stability ensured by the central foot. Easy movement of operators. Ergonomic work positions. Equipped with a permanent tray rinsing system to improve hygiene.

Taps: hand shower with hose length 3 m. water-hot / cold water mixer.
Option available: Stainless steel 316.

Element specially designed to receive body trays from the mortuary cold chambers. Once the body is placed on the body tray (which will also be the storage trays in the conservation rooms), it will simply be transferred to the support without using the body lifter. Hygiene, stability, ergonomics, multifunctionality and quality of manufacture are its main assets. Single or double use, with or without a tray The equipment is a must have for funeral homes (toilet and embalming care rooms).

Available options: Sink / Shower hose / Tap mixer /Ventilation system to connect / Sockets (electrical, HDMI, RJ 45…) / Light switch.

Body tray entirely made of stainless steel 304 L. Curved diamond cut with drainage point and cap. The tray is fitted with 4 casters and has 4 integrated handles.

Available option: Stainless steel 316

A high-end model made with quality materials, this body preparation table complements the equipment previously offered. Stamped tray with tap and shower hot/cold water with elbow control and waterproof electrical outlet 230 V. (Compliance with current Health and Safety Standards).

Available option: Top in stainless steel 316.